- manager@enlaisteel.com
- +8618063577840
Galvanized Steel Sheet
Galvanized sheet is a type of steel that is coated with zinc for protection by an electroplating process. The galvanized layer is applied to cold rolled steel at low temperatures. So it is also known as cold galvanized steel.
Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:1m-12m, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,
JIS,SUS,EN,etc.
Zinc Layer:Hot Galvanizing: 60-275g/m². Pre-galvanized: 80-275g/m²
Payment Method:FOB,CRF,CIF,EXW Acceptable
Galvanized Steel Coil
Through electrolytic galvanizing, a uniform and dense zinc layer is finally formed on the surface of the steel, but the mechanical properties of the material are still maintained. Electrogalvanized steel is usually sold in coil or sheet form The electro-galvanized products based on SPCC, SPCD, SPCE, SPCF and SPCG are named SECC, SECD, SECE, SECF and SECG respectively.
Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:508mm/610mm, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,
EN,etc.
Zinc Layer:Hot Galvanizing: 60-275g/m². Pre-galvanized: 80-275g/m²
Payment Method:FOB,CRF,CIF,EXW Acceptable
Galvalume Steel Sheet
Galvalume steel sheet is a type of steel that is coated with zinc for protection by an electroplating process. The galvanized layer is applied to cold rolled steel at low temperatures. So it is also known as cold galvanized steel.
Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:1m-12m, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,
EN,etc.
Thickness of Aluminum Zinc Coating:30-185g/m²
Content of Al-Zn Coating:Al: 55%,
Zn: 43.5%, Si: 1.5%
Payment Method:FOB,CRF,CIF,EXW Acceptable
Galvalume Steel Coil
Through electrolytic galvanizing, a uniform and dense zinc layer is finally formed on the surface of the steel, but the mechanical properties of the material are still maintained. Electrogalvanized steel is usually sold in coil or sheet form
Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:1m-12m, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,
EN,etc.
Thickness of Aluminum Zinc Coating:30-185g/m²
Content of Al-Zn Coating:Al: 55%,
Zn: 43.5%, Si: 1.5%
Payment Method:FOB,CRF,CIF,EXW Acceptable